Gratis · Cálculos y conversiones
Entramado de tabique.
Cuenta montantes, longitud de carreras y travesaños.
One extra stud closes the wall. Noggin length is the spacing minus the stud thickness. No openings, corners or load check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Studs
- 7
- Plate length
- 7.2 m
- Noggins
- 6
- Noggin length
- 0.562 m
Studs are the wall length divided by the spacing, rounded up, plus one end stud. Plates are two lengths, or three when the top plate is doubled. Each noggin is the spacing minus the stud thickness.
Cómo usar esta herramienta: Entramado de tabique
Introduce los datos o selecciona el archivo. Ajusta las opciones, genera el resultado y revísalo antes de copiarlo o descargarlo.
Límites y formatos compatibles
Los datos se procesan en tu dispositivo.
Notas técnicas en inglés
One extra stud closes the wall. Noggin length is the spacing minus the stud thickness. No openings, corners or load check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Count studs, plate length and noggins from the wall length and the stud spacing. One extra stud closes the wall. Noggin length is the spacing minus the stud thickness. No openings, corners or load check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 3.6 m wall with studs at 600 mm centres.