Gratis · Rekenen en converteren
Gootrekenmachine.
Schat lengte, beugels en regenpijpen uit de dakrandlengte.
Hangers include both ends. Downspouts round up, with at least one. The gutter profile and rainfall are not checked. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Gutter length
- 12 m
- Hangers
- 21
- Downspouts
- 2
- Corners
- 4
Hangers are floor(length / spacing) + 1. Downspouts round the eaves length up to the spacing, with at least one. Corners are the count you enter. Capacity of the gutter profile is not checked.
Zo gebruik je deze tool: Gootrekenmachine
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Hangers include both ends. Downspouts round up, with at least one. The gutter profile and rainfall are not checked. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate gutter length, hangers and downspouts from the eaves length and the two spacings. Hangers include both ends. Downspouts round up, with at least one. The gutter profile and rainfall are not checked. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
12 m of eaves, hangers every 0.6 m and a downspout every 6 m.