Gratis · Netwerk en IT-infrastructuur
Wifi-accesspointcalculator.
Schat hoeveel wifi-accesspoints een ruimte nodig heeft voor dekking, doorvoer en aantal apparaten, met aanwijzingen voor PoE en switchpoorten.
Realistic shared airtime throughput, far below the marketing PHY rate.
- For coverage
- 10 1,500 m² ÷ 150 m² (Office with partitions and meeting rooms)
- For throughput
- 2
- For device count
- 9
- Wi-Fi devices
- 300
- Peak Wi-Fi traffic
- 720 Mbps
- Switch ports and PoE
- 10 ports · 802.3at PoE (class 4)
- Rules of thumb only. Walls, ceilings, interference and antenna types change coverage a lot; a predictive or on-site survey is the reliable way to place access points.
- In dense areas, prefer more APs at lower transmit power on 20/40 MHz channels in 5 GHz (and 6 GHz where allowed), rather than fewer APs at full power.
- Regulatory channels and power limits differ by country.
Zo gebruik je deze tool: Wifi-accesspointcalculator
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Rules of thumb only; a predictive or on-site survey is needed for a final design. Regulatory channels and power vary by country. Everything is calculated in your browser; nothing is sent or probed on the network.
Coverage = area ÷ typical cell area for the environment. Throughput = active devices × rate ÷ realistic AP throughput. Device count = devices ÷ maximum devices per AP. Growth headroom applies to the last two.
1,500 m² of partitioned office with 150 people and 2 devices each needs about 10 Wi-Fi 6 access points, limited by coverage.