免费 · 计算与转换
电压降.
估算单相或三相的电阻性电压降,或满足压降限值所需的截面。
Copper resistivity is 1/58 ohm·mm²/m and aluminium is 0.0282, about 20 °C. Reactance, temperature and installation ampacity are not included. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Voltage drop
- 6.62069 V
- Voltage drop
- 2.878561 %
- Resistance
- 0.206897 Ω
Drop = 2 × current × ρ × length / area. ρ is in ohm·mm²/m and area is in mm². Copper uses 1/58 and aluminium 0.0282, about 20 °C. This is a resistive estimate.
使用方法: 电压降
输入数据或选择文件，调整设置并生成结果。复制或下载之前，请检查结果。
限制与支持格式
输入内容在您的设备上处理。
英语技术说明
Copper resistivity is 1/58 ohm·mm²/m and aluminium is 0.0282, about 20 °C. Reactance, temperature and installation ampacity are not included. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate resistive voltage drop, or the conductor section for a drop limit, in single-phase and three-phase circuits. Copper resistivity is 1/58 ohm·mm²/m and aluminium is 0.0282, about 20 °C. Reactance, temperature and installation ampacity are not included. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
16 A over 30 m on a 2.5 mm² copper conductor at 230 V.