Gratis · Netwerk en IT-infrastructuur
Opslag-IOPS-calculator.
Bereken hoeveel schijven een workload nodig heeft op basis van IOPS, lees/schrijfverhouding en RAID-schrijfstraf, en vergelijk HDD, SATA-SSD en NVMe.
Use sustained mixed-workload figures, not the peak 4K read number from a datasheet.
- Back-end IOPS (after write penalty)
- 26,000
- Drives for IOPS
- 186
- Drives for capacity
- 17
- Throughput at this I/O size
- 163.8 MB/s
- Usable capacity of the array
- 223.2 TB
- Functional IOPS of the array
- 20,031
Same workload on other drives
| Drive type | Drives for IOPS |
|---|---|
| 7,200 rpm HDD | 325 |
| 10,000 rpm SAS HDD | 186 |
| 15,000 rpm SAS HDD | 137 |
| SATA SSD (sustained mixed) | 2 |
| NVMe SSD, data-centre (sustained mixed) | 2 |
- Functional IOPS = raw IOPS × read % + raw IOPS × write % ÷ write penalty. Controller caches and SSD tiers can hide part of the penalty.
- Replace the per-drive IOPS with figures measured with fio or the vendor’s steady-state numbers for your block size.
Zo gebruik je deze tool: Opslag-IOPS-calculator
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Per-drive IOPS are conservative sustained values; use measured or vendor steady-state figures. Controller and SSD caches are not modelled. Everything is calculated in your browser; nothing is sent or probed on the network.
Back-end IOPS = workload × (read % + write % × write penalty). Drives = back-end IOPS ÷ IOPS per drive, then at least enough for the capacity.
20,000 IOPS at 70 % reads on RAID 10 with 10k SAS drives needs 186 drives; NVMe needs 2.