Gratis · Cálculos y conversiones
Broca de roscado.
Estima el diámetro de broca según el diámetro nominal, el paso y el porcentaje de rosca.
Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Tap drill
- 8.5 mm
Drill diameter = major diameter − pitch × (thread percent / 75). At 75% this is the common chart rule of one pitch under the major diameter. It is a shop estimate, not a thread-gauge inspection.
Cómo usar esta herramienta: Broca de roscado
Introduce los datos o selecciona el archivo. Ajusta las opciones, genera el resultado y revísalo antes de copiarlo o descargarlo.
Límites y formatos compatibles
Los datos se procesan en tu dispositivo.
Notas técnicas en inglés
Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate a tap drill from the major diameter, pitch and a thread percentage. Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
M10 × 1.5 at 75% thread → 8.5 mm.