Gratuit · Calculs et conversions
Foret de taraud.
Estimez le diamètre de perçage d'après le diamètre nominal, le pas et le pourcentage de filet.
Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Tap drill
- 8.5 mm
Drill diameter = major diameter − pitch × (thread percent / 75). At 75% this is the common chart rule of one pitch under the major diameter. It is a shop estimate, not a thread-gauge inspection.
Comment utiliser cet outil: Foret de taraud
Saisissez ou sélectionnez vos données. Réglez les options, générez le résultat puis vérifiez-le avant de le copier ou de le télécharger.
Limites et formats acceptés
Vos données sont traitées sur votre appareil.
Notes techniques en anglais
Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate a tap drill from the major diameter, pitch and a thread percentage. Drill = major − pitch × (percent / 75). At 75% this matches the common one-pitch chart rule. It is a shop estimate, not a gauge inspection. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
M10 × 1.5 at 75% thread → 8.5 mm.