Gratuit · Calculs et conversions
Calculateur d'armatures.
Comptez les barres selon l'entraxe et l'enrobage, puis estimez la longueur, le recouvrement et le poids.
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Bars per layer
- 40
- Bars
- 40
- Lap length
- 0.48 m
- Total length
- 240 m
- Mass
- 213.333333 kg
- Mass
- 470.319493 lb
Bar count is floor((run − 2 × cover) / spacing) + 1. Metric mass uses d²/162 kilograms per metre, with d in millimetres. Lap length is the multiple times the nominal diameter.
Comment utiliser cet outil: Calculateur d'armatures
Saisissez ou sélectionnez vos données. Réglez les options, générez le résultat puis vérifiez-le avant de le copier ou de le télécharger.
Limites et formats acceptés
Vos données sont traitées sur votre appareil.
Notes techniques en anglais
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Count reinforcing bars from spacing and cover, then estimate length, lap and steel mass. Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
12 mm bars at 150 mm centres over a 6 m run.