Gratis · Calcoli e conversioni
Calcolatore di armature.
Conta le barre da interasse e copriferro, poi stima lunghezza, sovrapposizione e peso.
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Bars per layer
- 40
- Bars
- 40
- Lap length
- 0.48 m
- Total length
- 240 m
- Mass
- 213.333333 kg
- Mass
- 470.319493 lb
Bar count is floor((run − 2 × cover) / spacing) + 1. Metric mass uses d²/162 kilograms per metre, with d in millimetres. Lap length is the multiple times the nominal diameter.
Come usare questo strumento: Calcolatore di armature
Inserisci i dati o scegli il file. Regola le opzioni, genera il risultato e controllalo prima di copiarlo o scaricarlo.
Limiti e formati supportati
I dati vengono elaborati sul tuo dispositivo.
Note tecniche in inglese
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Count reinforcing bars from spacing and cover, then estimate length, lap and steel mass. Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
12 mm bars at 150 mm centres over a 6 m run.