Gratis · Rekenen en converteren
Wapeningscalculator.
Tel de staven uit hartafstand en dekking en schat lengte, overlapping en gewicht.
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Bars per layer
- 40
- Bars
- 40
- Lap length
- 0.48 m
- Total length
- 240 m
- Mass
- 213.333333 kg
- Mass
- 470.319493 lb
Bar count is floor((run − 2 × cover) / spacing) + 1. Metric mass uses d²/162 kilograms per metre, with d in millimetres. Lap length is the multiple times the nominal diameter.
Zo gebruik je deze tool: Wapeningscalculator
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Count reinforcing bars from spacing and cover, then estimate length, lap and steel mass. Metric mass uses d²/162 kg/m. US mass uses nominal pounds per foot for sizes #3 to #18. Lap is a multiple of the nominal diameter. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
12 mm bars at 150 mm centres over a 6 m run.