Gratis · Netwerk en IT-infrastructuur
VoIP-bandbreedtecalculator.
Bereken de bandbreedte van VoIP-gesprekken met G.711, G.722, G.729, G.723.1, iLBC en Opus, inclusief headers, VLAN, cRTP en VPN.
- Per call, each direction
- 87.2 kbps
- Packets per second per call
- 50
- Voice payload
- 160 bytes
- Packet on the wire
- 218 bytes
- Total packets per second
- 3,000 Both directions
- Link needed (voice ≤ 33 %)
- 7.93 Mbps
Codecs compared with the same headers
| Codec | Packet | Per call (one way) |
|---|---|---|
| G.711 (64 kbps) | 20 ms | 87.2 kbps |
| G.722 wideband (64 kbps) | 20 ms | 87.2 kbps |
| G.729 (8 kbps) | 20 ms | 31.2 kbps |
| G.723.1 (6.3 kbps) | 30 ms | 21.9 kbps |
| iLBC (15.2 / 13.33 kbps) | 20 ms | 38.4 kbps |
| Opus (choose bitrate) | 20 ms | 47.2 kbps |
- Headers: IP 20 (IPv6 40) + UDP 8 + RTP 12 bytes per packet; cRTP shrinks them to about 2 bytes on a link-by-link basis.
- G.711 at 20 ms over Ethernet gives the classic 87.2 kbps per call per direction.
- Voice is commonly kept to about a third of a link in a priority queue, leaving room for signalling and data.
Zo gebruik je deze tool: VoIP-bandbreedtecalculator
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Signalling (SIP), RTCP and silence suppression are not included. VPN overhead covers IPsec ESP with AES-GCM and WireGuard over IPv4. Everything is calculated in your browser; nothing is sent or probed on the network.
Payload = codec bitrate × packet interval. Each packet adds IP, UDP and RTP headers (40 bytes, or about 2 with cRTP) plus link-layer bytes; bandwidth = packet size × packets per second.
G.711 at 20 ms over Ethernet needs 87.2 kbps per call per direction; 30 calls need 2.62 Mbps each way.