مجاني · الحسابات والتحويل
حاسبة السطح الخشبي.
قدّر الألواح والجوائز من عرض اللوح والفاصل والطول والتباعد.
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 10.8 m²
- Boards
- 21
- Joists
- 8
- Joist length
- 28.8 m
Board count uses the deck area divided by the board width plus the gap, then by the stock length, with waste, and rounds up. Joists are floor(width / spacing) + 1. Boards are assumed to run along the length.
طريقة الاستخدام: حاسبة السطح الخشبي
أدخل بياناتك أو اختر الملف. عدّل الخيارات ثم أنشئ النتيجة وراجعها قبل النسخ أو التنزيل.
الحدود والصيغ المدعومة
تُعالج بياناتك على جهازك.
ملاحظات تقنية بالإنجليزية
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate deck boards and joists from the deck size, board width, gap, stock length and joist spacing. Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 3.6 m × 3 m deck with 140 mm boards and a 10 mm gap.