無料 · 計算と変換
デッキ計算.
板幅、すき間、定尺、根太間隔から板と根太を見積もります。
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 10.8 m²
- Boards
- 21
- Joists
- 8
- Joist length
- 28.8 m
Board count uses the deck area divided by the board width plus the gap, then by the stock length, with waste, and rounds up. Joists are floor(width / spacing) + 1. Boards are assumed to run along the length.
使い方: デッキ計算
データを入力するかファイルを選び、設定を調整して結果を生成します。コピーやダウンロードの前に結果を確認してください。
制限と対応形式
入力内容はお使いの端末で処理されます。
英語の技術説明
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate deck boards and joists from the deck size, board width, gap, stock length and joist spacing. Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 3.6 m × 3 m deck with 140 mm boards and a 10 mm gap.