Gratis · Cálculos y conversiones
Calculadora de tarima.
Estima tablas y viguetas según el ancho, la junta, la longitud y la separación.
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 10.8 m²
- Boards
- 21
- Joists
- 8
- Joist length
- 28.8 m
Board count uses the deck area divided by the board width plus the gap, then by the stock length, with waste, and rounds up. Joists are floor(width / spacing) + 1. Boards are assumed to run along the length.
Cómo usar esta herramienta: Calculadora de tarima
Introduce los datos o selecciona el archivo. Ajusta las opciones, genera el resultado y revísalo antes de copiarlo o descargarlo.
Límites y formatos compatibles
Los datos se procesan en tu dispositivo.
Notas técnicas en inglés
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate deck boards and joists from the deck size, board width, gap, stock length and joist spacing. Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 3.6 m × 3 m deck with 140 mm boards and a 10 mm gap.