मुफ़्त · गणना और परिवर्तन
डेक कैलकुलेटर.
तख्ते की चौड़ाई, अंतर, लंबाई और दूरी से तख्ते और जॉइस्ट अनुमानित करें.
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 10.8 m²
- Boards
- 21
- Joists
- 8
- Joist length
- 28.8 m
Board count uses the deck area divided by the board width plus the gap, then by the stock length, with waste, and rounds up. Joists are floor(width / spacing) + 1. Boards are assumed to run along the length.
इस टूल का उपयोग कैसे करें: डेक कैलकुलेटर
डेटा दर्ज करें या फ़ाइल चुनें। विकल्प बदलें, परिणाम बनाएं और कॉपी या डाउनलोड करने से पहले उसकी जांच करें।
सीमाएं और समर्थित फ़ॉर्मैट
आपका डेटा आपके उपकरण पर संसाधित होता है।
अंग्रेज़ी में तकनीकी जानकारी
Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Estimate deck boards and joists from the deck size, board width, gap, stock length and joist spacing. Boards are assumed to run the full length in one piece of stock. The count rounds up after waste and does not stagger joints. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 3.6 m × 3 m deck with 140 mm boards and a 10 mm gap.