Gratis · Rekenen en converteren
Doorsnedewaarden.
Bereken oppervlak, zwaartepunt, traagheidsmoment en weerstandsmoment van een rechthoek, cirkel, buis of I-profiel.
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 0.08 m²
- Strong-axis I
- 0.001067 m⁴
- Weak-axis I
- 0.000267 m⁴
- Strong-axis modulus
- 0.005333 m³
- Centroid depth
- 0.2 m
Values are about the centroid of a symmetric section. Rectangle I uses width × height³ / 12 on the strong axis. A circle uses πd⁴ / 64. An I-section subtracts the side voids from the enclosing rectangle. This is geometry, not a member-capacity check.
Zo gebruik je deze tool: Doorsnedewaarden
Voer gegevens in of kies een bestand. Pas de instellingen aan, maak het resultaat en controleer het voordat je het kopieert of downloadt.
Limieten en ondersteunde formaten
Je invoer wordt op je apparaat verwerkt.
Technische opmerkingen in het Engels
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Calculate area, centroid, second moment of area and section modulus for a rectangle, circle, pipe or I-section. Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 200 mm × 400 mm rectangle, entered in metres as 0.2 × 0.4.