PasteZap
🌐 简体中文
免费 · 无需注册

免费 · 网络与 IT 基础设施

PoE 功率预算计算器.

按 IEEE 等级、端口标准(802.3af/at/bt)和实际功耗,检查交换机 PoE 预算能否带动摄像机、AP 和话机。

开始之前

部分技术控件使用英语。支持 Unicode 文本;文件格式和输出语言取决于具体工具。

下面以英语列出技术限制。处理大型文件或使用结果之前,请先查看这些限制。

CALCULATED IN YOUR BROWSER · NOTHING IS UPLOADED
Powered devices
PoE budget used356.4 / 370 W96.3 %
Remaining budget
13.6 W
Power at the devices
204 W
Ports used
23 / 24
Heat from devices and cable loss
1,216 BTU/h

Devices

DeviceQtyClassReserved at switchNotes
Wi-Fi 6 access point44120 WOK
IP phone12284 WOK
Fixed IP camera6392.4 WOK
PTZ camera1660 Wneeds class 6; 802.3at ports give up to class 4
  • Class reservations are the IEEE power at the switch port (15.4, 30, 60 or 90 W…), which includes the worst-case loss in 100 m of cable.
  • Many switches also limit power per port group or need a second power supply for the full PoE budget; check the switch datasheet.

使用方法: PoE 功率预算计算器

输入数据或选择文件,调整设置并生成结果。复制或下载之前,请检查结果。

限制与支持格式

输入内容在您的设备上处理。

英语技术说明

Device profiles are typical values; use the datasheet class. Per-port-group limits and redundant power supplies are not modelled. Everything is calculated in your browser; nothing is sent or probed on the network.

Class allocation reserves the IEEE power at the switch port for each class (15.4, 30, 60, 90 W…). Actual-draw mode scales the device draw by the class’s worst-case cable loss.

4 Wi-Fi 6 APs, 12 phones, 6 cameras and a PTZ reserve 356 W of a 370 W budget; the class 6 PTZ is flagged on 802.3at ports.