مجاني · الحسابات والتحويل
خصائص المقطع.
احسب المساحة ومركز الثقل وعزم العطالة ومعامل المقطع لمقطع مستطيل أو دائري أو أنبوبي أو بشكل I.
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 0.08 m²
- Strong-axis I
- 0.001067 m⁴
- Weak-axis I
- 0.000267 m⁴
- Strong-axis modulus
- 0.005333 m³
- Centroid depth
- 0.2 m
Values are about the centroid of a symmetric section. Rectangle I uses width × height³ / 12 on the strong axis. A circle uses πd⁴ / 64. An I-section subtracts the side voids from the enclosing rectangle. This is geometry, not a member-capacity check.
طريقة الاستخدام: خصائص المقطع
أدخل بياناتك أو اختر الملف. عدّل الخيارات ثم أنشئ النتيجة وراجعها قبل النسخ أو التنزيل.
الحدود والصيغ المدعومة
تُعالج بياناتك على جهازك.
ملاحظات تقنية بالإنجليزية
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Calculate area, centroid, second moment of area and section modulus for a rectangle, circle, pipe or I-section. Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 200 mm × 400 mm rectangle, entered in metres as 0.2 × 0.4.