Grátis · Cálculos e conversões
Propriedades da seção.
Calcule a área, o centroide, a inércia e o módulo de uma seção retangular, circular, tubular ou em I.
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 0.08 m²
- Strong-axis I
- 0.001067 m⁴
- Weak-axis I
- 0.000267 m⁴
- Strong-axis modulus
- 0.005333 m³
- Centroid depth
- 0.2 m
Values are about the centroid of a symmetric section. Rectangle I uses width × height³ / 12 on the strong axis. A circle uses πd⁴ / 64. An I-section subtracts the side voids from the enclosing rectangle. This is geometry, not a member-capacity check.
Como usar esta ferramenta: Propriedades da seção
Insira os dados ou escolha o arquivo. Ajuste as opções, gere o resultado e confira antes de copiar ou baixar.
Limites e formatos aceitos
Seus dados são processados no seu dispositivo.
Notas técnicas em inglês
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Calculate area, centroid, second moment of area and section modulus for a rectangle, circle, pipe or I-section. Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 200 mm × 400 mm rectangle, entered in metres as 0.2 × 0.4.