मुफ़्त · गणना और परिवर्तन
परिच्छेद गुण.
आयत, वृत्त, पाइप या I-परिच्छेद का क्षेत्रफल, केंद्र, जड़त्व आघूर्ण और मापांक निकालें.
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
- Area
- 0.08 m²
- Strong-axis I
- 0.001067 m⁴
- Weak-axis I
- 0.000267 m⁴
- Strong-axis modulus
- 0.005333 m³
- Centroid depth
- 0.2 m
Values are about the centroid of a symmetric section. Rectangle I uses width × height³ / 12 on the strong axis. A circle uses πd⁴ / 64. An I-section subtracts the side voids from the enclosing rectangle. This is geometry, not a member-capacity check.
इस टूल का उपयोग कैसे करें: परिच्छेद गुण
डेटा दर्ज करें या फ़ाइल चुनें। विकल्प बदलें, परिणाम बनाएं और कॉपी या डाउनलोड करने से पहले उसकी जांच करें।
सीमाएं और समर्थित फ़ॉर्मैट
आपका डेटा आपके उपकरण पर संसाधित होता है।
अंग्रेज़ी में तकनीकी जानकारी
Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
Calculate area, centroid, second moment of area and section modulus for a rectangle, circle, pipe or I-section. Sections are symmetric. An I-section is built from flange width, overall height, flange thickness and web thickness. No capacity or buckling check. Local arithmetic only. This is a quantity or geometry estimate, not a code check and not a substitute for a licensed professional.
A 200 mm × 400 mm rectangle, entered in metres as 0.2 × 0.4.